Skip to content

Cost, ROI and Staffing

AI Receptionist Cost: How Pricing Models Work

AI receptionist cost depends on how calls are counted. Per-minute, per-call and flat plans priced on one month of your own call log, plus the fine print.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing9 min read

On this page
  1. The bill follows how your calls are counted
  2. Three meters and what each one rewards
  3. Pull five numbers from last month's call log
  4. Example: one month at a four-bay repair shop
  5. Set the bill against what the calls are worth
  6. Questions that turn a quote into a monthly number
  7. Putting the estimate side by side
  8. Frequently asked questions
  9. References
Cost, ROI and Staffing: AI Receptionist Cost: How Pricing Models Work$0.61: what one minute of office staff time costs employers in wages and benefits ($36.73 an hour)COST, ROI AND STAFFINGAI Receptionist Cost: HowPricing Models Work$0.61what one minute of office staff time costs employersin wages and benefits ($36.73 an hour)AssistCallInsightsCost, ROI and Staffing: AI Receptionist Cost: How Pricing Models Work$0.61: what one minute of office staff time costs employers in wages and benefits ($36.73 an hour)COST, ROI AND STAFFINGAI Receptionist Cost:How Pricing ModelsWork$0.61what one minute of office staff timecosts employers in wages and benefits($36.73 an hour)AssistCall
Figure source: U.S. Bureau of Labor Statistics, 2026[1]

Key takeaways

  • Every AI receptionist price list runs on one of three meters: minutes, calls or a flat allowance with overage.
  • The same month of calls can swing by more than a quarter depending on rounding and whether transfer ring time is billed.
  • Divide billable minutes by calls to compare a per-call quote with a per-minute quote in one line.
  • Size any allowance to your busiest month, and ask how robocalls and two-second hang-ups are billed.
  • Judge the monthly figure against staff time freed and new-customer calls answered, not against zero.

The bill follows how your calls are counted

Every AI receptionist price list comes down to one of three meters: minutes, calls, or a flat monthly allowance with a charge for going over. Which one costs you least depends less on the headline rate than on the shape of your own calls: how many there are, how long they run, how many are robocalls or hang-ups, and how often a call gets passed to a person. This guide quotes no vendor prices. It shows how to turn one month of your call log into the units each model bills, so you can check any quote in ten minutes and see what the fine print adds.

Plenty of owners are pricing this for the first time. In the Census Bureau's business survey, 37% of firms with at least 250 employees reported using AI, against less than 20% of firms with four or fewer employees[2]. Small firms usually have the least slack at the front desk, so they feel a pricing mistake soonest: the plan that looked cheap in the demo and doubles in a busy month.

Three meters and what each one rewards

The pricing structures on AI receptionist quotes, and where each one bites
Pricing modelWhat you pay forCheapest whenWatch for
Per minuteConnected time on the calls the system handlesCalls are short and simple: hours, directions, booking a slotEach call rounded up to a whole minute; transfer ring time on the clock
Per callEach call answered, whatever its lengthCalls run long: estimates, intake questions, reschedulingRobocalls, wrong numbers and two-second hang-ups billed as full calls
Flat allowanceA monthly fee covering a set number of minutes or calls, then overageVolume is steady from month to monthAn allowance sized to an average month; overage priced above the in-plan rate
Add-onsExtra numbers, locations, languages, setup or custom connectionsYou need only the core answeringFees for script changes; a charge for every extra number

Software has one cost structure that live answering services do not: no after-call work. A human agent spends time typing up the message once the caller hangs up, and many services bill that time. Software writes the summary as part of the call, so on a per-minute plan you are paying for talk time. Ask anyway, because some vendors charge separately for outbound texts, extra phone numbers or keeping recordings beyond a set period.

Each model also shifts risk. Per-minute puts the risk of long calls on you. Per-call puts it on the vendor, which is why per-call rates tend to be set with a cushion. A flat allowance puts your seasonality on you: a busy month costs more than the plan suggests, and a quiet one leaves minutes unused. Trades with long estimate calls usually lean toward per-call pricing; offices fielding quick questions about hours and parking lean toward per-minute. The home services guide to AI phone agents versus answering services shows how that trade-off plays out for contractors.

Pull five numbers from last month's call log

You need one normal month of calls, exported from your phone system or carrier portal as a spreadsheet: date, time, duration, caller number and outcome. If you plan to forward only after-hours and overflow calls, filter to those first. The software never sees the calls your staff pick up, so they do not belong in the estimate.

  1. Calls that would reach the system

    Count the calls in the hours and situations you plan to forward. This is your call count, the base unit for per-call pricing.

  2. Total minutes and the typical call

    Sum the durations and note the median as well as the average. A few fifteen-minute calls drag the average well above what most callers need.

  3. Short and junk calls

    Count calls under 20 seconds and numbers you recognize as robocalls. Per-call plans usually bill them; per-minute plans barely notice them.

  4. Transfers

    Count calls that would need a person: urgent jobs, complaints, questions about work in progress. Note roughly how long a transfer rings before someone answers.

  5. Your busiest month

    Repeat the count for the busiest month of the past year. An allowance should be sized to that month, not the average one.

Junk calls deserve their own column. Robocalls still made up most of the Do Not Call complaints the FTC received in fiscal 2025[3], and a business number listed on maps and directories takes its share of them. On a per-call plan, 30 junk calls in a month are 30 billable calls. Ask each vendor whether calls under a set length are free, and whether known spam numbers are screened before the meter starts.

Example: one month at a four-bay repair shop

Example: an independent four-bay auto repair shop is weighing whether to forward its whole main line to an AI receptionist, with transfers to the service writer for anything about a car already in the shop. Last month 520 calls came in. They added up to 1,380 minutes of talk time, an average of about 2.7 minutes, pulled up by a handful of long estimate conversations. Seventy calls lasted under 20 seconds, and 95 would have needed a transfer, each ringing the service writer's phone for about a minute and a half before it connected.

Example: where billable units are created on one forwarded call
  • Caller
  • SI Employee
  • Your team
  • System
  1. 01Caller

    Customer calls the shop

    The main line is forwarded, so the call goes straight to the answering system.

  2. 02SI Employee

    Answers and works the call

    Answers questions, books the slot or takes a detailed message; the meter is running.

  3. 03Your team

    Transfer to a person

    Rings the service writer for status calls. Ask whether ring time is billed.

  4. 04System

    Summary by email

    Recording, transcript and summary arrive after the call, with no wrap-up time to pay for.

  5. 05System

    Meter applies its rule

    Per second, whole minute or per call: this step decides the billable units.

Example call path for a repair shop. The last step is where contracts differ most, so it is the one to read twice.

Example: the same 520 calls counted five ways
Counting ruleBillable unitsWhat changed
Per second, transfers off the clock1,380 minutesTalk time only
Per second, transfer ring time billed1,523 minutesAdds 95 transfers at about 1.5 minutes each
Every call rounded up to a whole minute, ring time billed1,783 minutesRounding adds about half a minute per call
Per call, every call520 callsIncludes 70 calls under 20 seconds
Per call, short calls free450 callsOnly if the contract says so in writing

The spread is the lesson. On per-minute pricing, the same month is 1,380 or 1,783 billable minutes depending on two lines of fine print, a difference of 29% in this example before anyone has compared rates. On per-call pricing, whether short calls count moves the bill by about 13%.

To compare a per-call quote with a per-minute quote, divide. In the example the shop averages 3.4 billable minutes per call under the rounded rule (1,783 divided by 520). If one vendor's per-call price is less than 3.4 times another vendor's per-minute price, per-call is cheaper for this shop; if it is more, per-minute wins. Run the same division on your own log and the comparison takes one line on a notepad.

For a flat allowance, test the busiest month, not the average. In the example, suppose the shop's July runs a quarter busier, about 2,230 rounded minutes. An allowance of 1,800 minutes would leave roughly 430 minutes at the overage rate that month. A plan that fits March can quietly cost noticeably more for a third of the year, which is why the overage rate deserves as much attention as the monthly fee.

Set the bill against what the calls are worth

A monthly figure means little on its own. Two comparisons give it meaning: what the same calls cost in staff time today, and what the new-customer calls among them are worth.

Start with staff time. In June 2026, private employers paid $36.73 per hour worked in wages and benefits for office and administrative support staff, about 61 cents a minute, and $49.01 for installation, maintenance and repair workers, about 82 cents a minute[1]. In a repair shop the phone often lands on a technician, and BLS puts the median pay of automotive technicians at $24.34 an hour before benefits[4]. A per-minute quote below those figures is not automatically a saving, though. You pay staff for the hour whether the phone rings or not; the saving is real only when the freed time goes to work that earns, such as a technician back under a car instead of walking to the front counter.

Employer cost per hour worked, by who picks up the phoneWages plus benefits, private industry, June 2026.
Employer cost per hour worked, by who picks up the phoneColumn chart. Service: $23.73; Sales: $35.85; Office and admin: $36.73; Repair technicians: $49.01; Managers: $88.63.$0$25$50$75$100Service: $23.73$23.73ServiceSales: $35.85$35.85SalesOffice and admin: $36.73$36.73Office and adminRepair technicians: $49.01$49.01RepairtechniciansManagers: $88.63$88.63ManagersEmployer cost per hour worked, by who picks up the phoneColumn chart. Service: $23.73; Sales: $35.85; Office and admin: $36.73; Repair technicians: $49.01; Managers: $88.63.$0$25$50$75$100Service: $23.73$23.73Servi-ceSales: $35.85$35.85SalesOffice and admin: $36.73$36.73OfficeandadminRepair technicians: $49.01$49.01Repairtechn-iciansManagers: $88.63$88.63Manag-ers

Source: U.S. Bureau of Labor Statistics, 2026[1]

Show the data
Occupational groupCost per hour worked
Service$23.73
Sales$35.85
Office and admin$36.73
Repair technicians$49.01
Managers$88.63

Then the calls themselves. A missed call is rarely recovered by calling back: in Pew's survey, 80% of US adults said they generally do not answer calls from numbers they do not recognize[5]. AAA put the average car repair bill at between $500 and $600 in 2017[6], so each missed new customer is real money even on a routine job.

ExampleExample: unanswered new-customer calls at a fictional four-bay repair shop
Example: worked figures
InputExample
Calls per week120
Calls that go unanswered (%)18%
Unanswered calls from new customers (%)35%
Share of answered new callers who book50%
Average repair order$500
Unanswered calls a month94
From new customers33
Bookings that would have followed16
Monthly value at risk$8,184

How it is worked out: Calls a week × 4.33 weeks × unanswered share × new-customer share × booking rate × average value.

Assumptions

  • Average repair order of $500, the low end of the $500 to $600 average repair bill AAA reported.[6]
  • No credit is given for callbacks, because most adults let calls from unknown numbers ring out.[5]
  • The 120 calls a week, 18% missed, 35% new customers and 50% booking rate are invented for a four-bay shop; replace them with your own log.

Example only: roughly $8,200 a month of repair work sits behind unanswered new-customer calls in this model. Set your monthly billable units, priced at the quotes you hold, against your own result.

Questions that turn a quote into a monthly number

Put these to every vendor before you sign. Each answer changes a row in the five-way table, so write them down next to the quote.

  1. Is time billed per second, in six-second blocks, or rounded up to the minute on every call?
  2. Is there a minimum charge per call, and are calls under a set length free?
  3. Does the meter run while a transferred call rings my phone, and after I pick up?
  4. How are spam calls and robocalls handled: screened before answering, answered and billed, or credited later?
  5. What happens past the allowance: overage at which rate, an automatic upgrade, or calls going to voicemail?
  6. Do unused minutes roll over, and is the allowance shared across numbers and locations?
  7. What is charged once: setup, moving my number, script changes, connections to other software?
  8. How much notice comes before a price change, and can I leave without a penalty?

The vendor question list covers the capability side of the same conversation; billing is the part most demos skip. If you want to see the units in context, the two-week test produces exactly the call log this estimate needs, and how an AI receptionist works explains why a transfer adds time to a call.

Putting the estimate side by side

With billable units and the vendor answers in hand, build one line per quote: units under that vendor's counting rule, times the rate, plus overage in your busiest month, plus one-time charges spread over a year. Then set the total against the staff time and recovered work you estimated. If the quote wins only on the most optimistic call log, wait. If it wins on an ordinary month, you have your answer.

An SI Employee fits the same arithmetic. It answers the forwarded calls, books into the connected calendar or takes a detailed message, transfers to the numbers you approve, and emails a summary with the recording and transcript, so the units it uses can be counted straight from your log. The auto repair service desk example models a full shop line this way.

For the other side of the comparison, the answering service cost guide prices the same kind of log under live-agent contracts, where after-call work is billed as well, and the virtual receptionist cost breakdown sets those bills against an in-house hire.

Frequently asked questions

Is per-minute or per-call pricing cheaper for an AI receptionist?

Divide your billable minutes by your number of calls. If the per-call price is lower than that figure times the per-minute price, per-call is cheaper. Short, simple calls usually favor per-minute; long estimate or intake calls favor per-call.

Do robocalls and hang-ups count toward the bill?

On many per-call plans they do, and on per-minute plans they cost a few seconds each. Ask whether calls under a set length are free and whether known spam numbers are screened before the meter starts.

Are setup fees normal?

Some vendors charge once for setup, moving your number or custom connections to other software; others include them. Ask for every one-time charge in writing, including fees for changing the script later.

How do I estimate the cost without a call log?

Ask your carrier or phone system provider for a call-detail export; most portals keep recent records. If yours does not, keep a tally by the phone for one normal week, noting the length of each call, and multiply by 4.33 for a month.

Should I size a flat plan to my average month?

Size it to your busiest month, or confirm that overage is billed at the same rate as in-plan minutes. Otherwise the plan that fits a quiet month overspends in a busy one.

References

  1. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation, Table 4: private industry workers by occupational and industry group, June 2026 (opens in a new tab) ↑

  2. U.S. Census Bureau (2026). Large Firms With at Least 20 Employees Biggest AI Users (opens in a new tab) ↑

  3. Federal Trade Commission (2025). FTC Releases Annual Do Not Call Registry Data Book (opens in a new tab) ↑

  4. U.S. Bureau of Labor Statistics (2025). Automotive Service Technicians and Mechanics: Occupational Outlook Handbook (opens in a new tab) ↑

  5. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑

  6. AAA Newsroom (2017). One-in-Three U.S. Drivers Cannot Pay for an Unexpected Car Repair Bill (opens in a new tab) ↑

Book a demo

Meet your SI Employee.

Book a short demo. We walk through calls like yours and show what your SI Employee would answer, book and follow up.

Book a demo